The process of liquefied natural gas

  • Zhaoyin Jiang Petrochemical Institute, Daqing University of Technology, Heilongjiang, China
  • Lixi Peng Petrochemical Institute, Daqing University of Technology, Heilongjiang, China
  • Shiyao Chang Petrochemical Institute, Daqing University of Technology, Heilongjiang, China
  • Ping Ouyang Petrochemical Institute, Daqing University of Technology, Heilongjiang, China
DOI: https://doi.org/10.18282/i-es.v1i1.117
Keywords: Natural Gas Liquefaction, Design Data, Technical Analysis, Process System

Abstract

In this paper, the analysis of liquefied natural gas process plant technology, into the device before the natural gas compression, and then through the MEA aqueous solution to remove CO2. Finally, the compressed water removed; clean natural gas before entering the liquefaction unit. In the liquefaction unit, the high-pressure natural gas is cooled and liquefied deep. The required cooling capacity is obtained by circulating the gas turbine to drive the closed mixed refrigerant nitrogen, methane, ethylene, propane and other components, and liquefied natural gas (LNG), which is finally stored in an atmospheric tank through a liquefied natural gas container or liquefied natural gas tanker for distribution. The recycle of the recycle refrigerant is carried out by means of environmental conditions. The heating medium required during the installation process is the hot oil heated by the exhaust gas of the gas turbine. The liquefied gas in the liquefied natural gas tank is compressed to regenerate the desiccant and then sent to the gas turbine as the fuel gas.

References

Jing Jiaqiang, Liang Guangchuan, Jiang Hongye. Liquefi ed natural gas technology. Chemical Industry Press.

Guo Ji Chang. Liquefi ed Natural Gas Application and Safety. China Petrochemical Press

Published
2018-08-09
Issue
Vol. 1 No. 1 (2018)
Section
Review Article

Copyright (c) 2018 Zhaoyin Jiang et al.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors contributing to this journal agree to publish their articles under the Creative Commons Attribution-Noncommercial 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit, that the work is not used for commercial purposes, and that in the event of reuse or distribution, the terms of this license are made clear. With this license, the authors hold the copyright without restrictions and are allowed to retain publishing rights without restrictions as long as this journal is the original publisher of the articles.