Rocess Design of Fiber Reinforced Magnesium Matrix Composites

Hualun Ding; Ximin Gong; iaoxuan Shang

doi:10.18282/ims.v1i1.106

Hualun Ding School of Materials Science and Engineering, Shenzhen Engineering University, Guangdong, China
Ximin Gong School of Materials Science and Engineering, Shenzhen Engineering University, Guangdong, China
iaoxuan Shang School of Materials Science and Engineering, Shenzhen Engineering University, Guangdong, China

DOI: https://doi.org/10.18282/ims.v1i1.106

Keywords: ﬁber reinforced, magnesium base, extrusion casting method, spray deposition method, process ﬂow

Abstract

This paper chooses magnesium as the matrix of composite materials, selects carbon ﬁber as reinforcement, and designs the composite scheme according to the structure and performance of Mg-based composites. The performance characteristics and application prospect of fiber-reinforced magnesium matrix composites are introduced. Wait. In this paper, the process of preparing carbon ﬁber magnesium matrix composites by compression casting method and spray deposition method is designed. The process ﬂow chart of these two design schemes is determined by analyzing the principle of these two kinds of preparation methods, and the speciﬁc problems of the process are analyzed and summarized.

References

Dong Qun, Chen Liqing, Zhao Mingjiu, Bi Jing. Preparation, performance and application of magnesium matrix composites [J].Materials Review. 2004,4.18 (4).

Li Wei, Wang Xiaoliang, Yang Shaobin, Xu Zhenzhen. Study on the preparation of fiber reinforced magnesium matrix composites [J] .Hut Working Technology.2014.43 (12).

Ruan Aijie, Ma Liqun, Pan Anxia, Ding Yi. Progress in the preparation of magnesium matrix composites [J]. Nonferrous Metals .2011,5.63 (2).

Gu Xuehua, Yang Fang, Qi Lehua, Zhou Jiming. New preparation technology of magnesium matrix composites and its application [J]. Journal of Plastic Engineering .2011,4.18 (2).

TAN Juan, MA Nan-gang. Study on the preparation of magnesium matrix composites [J]. Journal of Materials Research. 2006,11.20 (7).

Chen Xiao, Fu Gaosheng, Qian Kuangwu. Research status and development trend of magnesium matrix composites [J].Electrical and Mechanical Technology .2003,12.

Tian Jun, Li Wenfang, Han Lifa, Peng Jihua, Liu Gang. Magnesium-based composite materials research status and development[J]. Materials Herald .2009,9.

Du Wenbo. Preparation of magnesium-based composite materials and new technology [J]. Rare metal materials and engineering.2009,3.38 (3).

Zhao Huifeng. Preparation of carbon fiber reinforced magnesium matrix composites [D]. Shanghai Jiaotong University:Shanghai Jiaotong University .2007,2.

Ren Fozhong. Preparation and properties of short carbon fiber reinforced magnesium matrix composites [D]. Chongqing University: Chongqing University .2011,4.

LUO Xiao-ping, ZHANG Min-gang, LU Chun-xiang, LV Xiao-xuan. Preparation of carbon fi ber reinforced magnesium matrix composites [J]. Site Composites, 2011.31 (5).

Wang Jinxing, Li Hejun, Qi Lehua, Wang Zhenjun. Microstructure model of thermoforming of C fi ber reinforced magnesium matrix composites [J]. Chinese Journal of Plasticity Engineering .2010.17,3.

Zhang Xiuqing, Teng Xinying, Wang Haowei. Preparation of magnesium matrix composites [J] .Hut Working Technology.2004.3 (58-61).

Preparation of Al / AIN ceramic matrix composites by extrusion casting [J]. China Ceramics Industry .2014,2.21 (1). [13] Lu Yuan, Jing Qiangqi, Gong Nan, Li Jingjing, Rocess Design of Fiber Reinforced Magnesium Matrix Composites10

Song Lei, Shao Ming, You Dongdong. Research and development trend of extrusion casting equipment [J]. Foundry.2010,10.59 (10).

Deng Jianxin, Shao Ming, You Dongdong. Squeeze casting equipment status and development analysis [J]. Casting .2008,7.57(7).

Guo Zhihong. AZ80 magnesium alloy extrusion casting process simulation and composite materials preparation [D]. Sun Yatsen University: Zhongshan University .2014,4.

Qi Pixiang. The latest development of extrusion casting technology [J]. Special Casting and Nonferrous Alloys .2007,8.27 (9).

Chen Yun. Magnesium alloy extrusion casting forming mechanism and experimental study [D]. Wuhan University of Technology: Wuhan University of Technology .2013,11.

PENG Chao-qun, HUANG Bo-yun. Spray deposition technique [J]. Nonferrous Metals, 2002, 2.54 (1).

Fu Dingfa, Ning Honglong, Chen Zhenhua. Spray deposition technology and preparation of bimetallic materials [J]. Journal of Materials Science and Engineering. 2001,1.24 (1).

Application of spray deposition technology in superalloy and Si-Al alloy [J]. New Technology of New Materials .2002.10.

Yu Yue-sheng, Yuan Fu-an, Liu Gui-lin, Dai Yong. Application of spray deposition technology in rapid precision hot forging die [J]. Foundry Engineering .2010.1.

Ren Zhilan, Zhang Rong. Development of spray deposition technology and its application in alloy manufacturing [J]. Metal casting and forging technology .2008,8.

E. J. Lavernia, et al., Inter. J Rapid Solidifi cation, 1988; 4: 89.

A. R. E. Singer, et al., Metal Tech., Feb. 1983; 10: 61.

Mei Guo-fa, Tian Shi-fan, Zeng Song-yan, Li Qing-chun. Progress and prospect of atomization spray deposition technology [J].Materials Science and Engineering .1996.14 (4).

Shi Jianjun. Study on near-fi nal spray deposition technology and process parameters of thick-wall irregular tube [D]. Nanjing University of Aeronautics and Astronautics: Nanjing University of Aeronautics and Astronautics .2009,11.

W.G. Wang, B.L. Xiao, Z.Y. Ma. Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced by coated continuous carbon fi bers [J] .Composites Science and Technology. 2011, 10.72 (152-158).

Yuan Wuhua, Chen Zhenhua. Research and progress of multi-layer spray deposition technology [J]. Materials Review.2000,1.14 (1).

W.G. Wang, B.L. Xiao, Z.Y. Ma. Interfacial reaction and nanostructures in Mg matrix composites reinforced by carbon fibers modified by sol-gel method [J] .Composites Science and Technology. 2013, 9.87 (69-76).