pisco_log
banner

Development and Application of 3D Printing and Its Materials

Haocheng Du, Shaoqian Chen

Abstract


With the improvement of 3D printing technology, it has gradually gained popularity in China, and it has become famous for its wide variety of printing biological materials. This article will analyze and research the application and development of 3D printing technology in chemical materials. Explain the market demand for 3D printing technology, as well as the problems existing in the development of domestic 3D printing technology, and predict its development prospects from the development field.


Keywords


3D Printing; Chemical Materials; Market Prospects; Development Routes; Application Areas

Full Text:

PDF

References


Hu T. Research on the application and development prospect of chemical materials in 3D printing industry (in Chinese). China Petroleum and Chemical Industry Standard and Quality 2019; 39(2): 188–189.

Zhang X, Tang S, Zhao H, et al. Research status and key technologies of 3D printing technology (in Chinese). Materials Engineering 2016; 44(2): 122–128.

Yang D, Xia X. 3D printing of biological materials: progress and clinical application (in Chinese). Chinese Journal of Tissue Engineering Research 2017; 21(18): 2927–2933.

Liu L, Xu W, Wang L, et al. Research progress of geometric calculation in 3D printing (in Chinese). Chinese Journal of Computers 2015; 38(6): 1243–1267.

Jia M, Chen K, Xue P. Research on high performance fiber reinforced thermoplastic composite molding technology and equipment (in Chinese). Beijing University of Chemical Technology and Tianjin University of Technology. Summary of the 2nd National Advanced Composite Materials Science and Application Symposium. Professional Committee of New Chemical Materials of China Chemical Society; Beijing University of Chemical Technology, Tianjin Polytechnic University, China Science Energy and Engineering Technology Research Institute (Beijing) Co. Ltd; 2018. p. 38.

Zhang L. Application and development of chemical materials in 3D printing field (in Chinese). Chemical Industry 2017; 35(2): 37–41.

Zhang S, Xu Y, Sun S, et al. Research and development status of 3D printing materials (in Chinese). China Plastics 2016; 30(1): 7–14.




DOI: http://dx.doi.org/10.18282/ims.v3i2.331

Refbacks

  • There are currently no refbacks.